The mill roll can not operate properly in Raymond mill machine

For those who understand the working principle of the Raymond mill, the importance of the grinding roller is known, and the interaction with the grinding ring smashes the material. Therefore, if the part fails to work, the production will not be carried out, and at this time, the part will cause a large wear, which will reduce the life and increase the cost of the operation of the mill, so it will not move. The phenomenon needs to be solved in time. So how is this phenomenon caused? First of all, if the powder enters the roller shaft, it will cause it to turn. This is because the powder will cause the mixing of lubricating oil and dust, thereby forming grease stains and polluting the lubricating oil. For this phenomenon, the sealing of the grinding roller and the prevention of the contamination of the lubricating oil can reduce the turning of the lubricating oil. The phenomenon. Secondly, if the daily maintenance work is not in place, it will also cause the grinding machine to turn the grinding roller, so the maintenance work cannot be ignored. It can be seen that the phenomenon that the roller of the Raymond mill does not rotate is mainly caused by the phenomenon of lubricating oil contamination in the roller shaft and the lack of daily maintenance work. The solution for each of the reasons has been analyzed. When the grinding machine is working, there is a phenomenon that the grinding roller does not rotate, and it is necessary to stop the processing first. Clean the internal dirt and add new oil. For the serious wear of the roller, the parts need to be replaced.