Introduction of dolomite and the milling process of dolomite mill

prev Industry News next
Release time:2018-11-28

If you are looking for related products or have any other questions, you can call the company service hotline at any time, or click the button below to communicate with us online!

Dolomite is a carbonate mineral with iron dolomite and manganese dolomite, respectively. Its crystal structure is like calcite, often rhombohedral, when cold dilute hydrochloric acid will foam slowly. Some dolomites glow orange-red under cathode ray irradiation. Dolomite is the main mineral component of dolomite and dolomitic limestone. Dolomite can be used in building materials, ceramics, glass and refractories, chemical industry, agriculture, environmental protection, energy saving and other fields. It is mainly used as basic refractory and flux for blast furnace ironmaking. Production of calcium magnesium phosphate fertilizer and preparation of magnesium sulfate. And the ingredients for producing glass and ceramics. Dolomite is a carbonate mineral with iron dolomite and manganese dolomite, respectively. Dolomite is the main mineral component of dolomite and dolomitic limestone. Dolomite can be used in building materials, ceramics, glass and refractories, chemical industry, agriculture, environmental protection, energy saving and other fields. The dolomite milling process is as follows: 1: The crushed dolomite is transported to the raw material bin by special vehicle, and then sent to the E-crusher by forklift/manual to crush the material, which is smaller than the maximum feed size of the grinder. 2: The dolomite after crushing by crusher is lifted from hoist to hopper, and the hopper drops out and feeds to the main machine evenly by the feeder. 3: The qualified products in the grinding process are screened by the screening system and then entered into the collector by the pipeline. After collection, the finished products are discharged by the outlet pipe, and the unqualified products are re-grinded in the main machine.

4: The purified air flows into the blower through the residual air duct above the dust collector. The air passage is circular. Except for the positive pressure from the blower to the grinding room, the air flow in the other pipelines flows under negative pressure, and the indoor sanitation condition is good.

Contact
Zhengzhou Shuguang Heavy Machinery Co., Ltd.

TEL:0086-13523465141

0086-371-67666660

FAX:0086-371—68125111

Email:shuguang_mill@163.com

Address:No.104,Gongye west road,Shangjie district,Zhengzhou City,Henan China