Three steps to let you know the wear condition of the shredder blade

1. Because the new equipment with rough appearance is not smooth, there are some small folds, oxidation or carbon layer and a series of shortcomings. The equipment has sharp edges, and the surface of the tool is not touched very much, the pressure is greater, so during this period, the blade wear of the shredder is also called the operation of the equipment. Replacement is not recommended during this period, because it is the highest cycle of equipment performance and can maximize the value of invention. 2. After the final period, the rough surface of the polishing knife is basically polished, and the knife has begun to wear, but because it is at an unprecedented sharp margin, the wear is very slow. Therefore, the film shredder equipment in normal operation conditions, wear period is very stable, slow. 3. This is the most important period. Close attention should be paid to the wear condition of blades. If the wear bandwidth is extended to a certain limit, the surface roughness, cutting force and cutting temperature are added agilely, the wear rate is added quickly, so that the tool fails and the cutting ability is lost. In order to ensure the processing quality, wear and tear should be prevented during a period of production. Before this period arrives, the knife should be changed or the blade should be replaced in time.