What problems will be encountered in the use of mobile crushing station

The mobile crushing station is a large-scale equipment that integrates feeding, crushing, and transportation. At present, it is mainly used in material transportation and processing operations, such as metallurgy, mining, and chemical industries.Mobile crushing stations have gradually become the main equipment for continuous operations and semi-continuous process intermittent operations. Then, in a wide range of applications, what problems will mobile crushing stations encounter?

1. Uneven production granularity: the material particles after crushing in the mobile crushing station are too fine or too coarse,when the particles are too fine, there may be more hammers, so reduce the hammers;When the particles are too thick, there may be fewer hammer heads, so increase the hammer head;there may also be reasons such as loose conveyor belts and insufficient voltage,at this time, adjust the tightness of the conveyor belt and check that the voltage and power are adjusted to the appropriate voltage.

2. Unstable vibration: Irregular vibration and increased vibration during the use of the mobile crushing station may cause problems with the heart rate of the hammer. Check it in time and replace the hammer if necessary;it is also possible that the bearings and gear couplings are damaged, so replace them in time to make the vibration stable.

3. Irregular operation: During the work of the mobile crushing station, we must pay attention to the safety of the site, as well as the safety of the operators, because the crusher is in a high-speed operation state during the work. If you do not pay attention, it is easy to cause some injuries to the surrounding personnel. For us, the mobile crushing station is not only a mechanical device, but also a good helper in our lives.

4. Bearing temperature is too high: the shaft of the mobile crushing station bears the full load of the machine. If the bearing temperature is too high, it may be insufficient lubricating oil, so you need to add an appropriate amount of lubricating oil; if the lubricating oil is polluted, you need to clean the bearing before replacing the lubricating oil; if the bearing is damaged, then the bearing needs to be replaced to lower the temperature.

5. Inadequate lubrication: the mobile crushing station has poor lubrication, and the parts that are easy to grind are not replaced in time. The maintenance is not complete. If you wait for the equipment to have problems and then perform maintenance, it will affect production and cause losses. Mobile crushing station equipment If you add oil according to the lubrication table or cycle during use, it will extend the service life of the mobile crushing station equipment.

As a supplier with nearly 30 years' manufacturing, Shuguang Heavy Machinery also produces and sells hammer crushers, impact crushers, vertical shaft crushers, cone crushers, compound crushers, Raymond mills, high pressure mills,powder machine, vertical mill, ultra-fine grinding machine, ball mill, double-shaft shredder and other heavy equipment crusher. Feel free to contact us for more details.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

After-sales Service Department: 0371-67666667