Causes and solutions for noise during operation of bauxite mill

We all know that bauxite mill is a mechanical device used to grind bauxite. After long-term work, the mill will have some problems in production, such as some noise during the grinding process. The noise is normal, but if it produces a relatively large noise in production, this is not normal. Where should there be some faults, so how should the noise be solved?

1. First check the transmission gear. If the clearance of the transmission gear is too large or too small, there will be a phenomenon of toothing, which will cause rapid wear of the transmission gear, deformation of the shape, large amplitude of vibration, etc. There is noise, so it is necessary to regularly check and adjust the meshing clearance of the transmission gear of the equipment. If there is any fault, it should be dealt with in time.

2. If the noise is caused by the vibration of the main engine, then it is necessary to check whether the grounding bolt is loose. If it is loose, tighten it immediately; check the material to be inspected. If the material is too large or too Small to make timely adjustments.

3. If it is the noise generated by the vibration of the fan, it is necessary to check whether there is dust on the fan blade or the uneven wear of the blade. When the bauxite mill is working, the blade is unstable during rotation and causes the fan. vibration. In general, if the bauxite mill is often maintained and maintained, the occurrence of such failures can be greatly reduced, thereby improving work efficiency.